Man Ship Replacement Gaskets – Portlights

Man Ship Replacement Gaskets – Portlights

U/M

Each

Features

  • Replacement gasket for man ship portlights
  • Weather resistant neoprene gasket
  • For portlights models LS, LSO, LSR, and LE
  • Excellent strength and durability
  • Water & air -tight seal when closed
  • Gaskets are sold in pre-cut lengths
  • LS – Rectangular
  • LSO – Oval
  • LSR – Round
  • LE – Elliptical

 

PART NO. MODEL CROSS SECTION UNIT LENGTH
7122-LS LS 7/16″ x 3/8″ All lengths available
7122-LOLR LSO, LR, LSR 5/8″ x 1/2″ 16 ft.
7122-LE LE 1/2″ x 1/2″ 4 ft.

 
For rectangular (LS) portlights larger than 10″ x 20″, the 7122-LOLR gasket is used.

Description

Replacement portlight gasket. Gaskets are made of water resistant, thermo-plastic neoprene material. Neoprene gaskets have excellent strength, durability, are abrasion resistance, gaskets resist hardening, and remain soft and pliable, holding up under both hot and cold extremes.
 
To calculate your required length:

  • Measure your cut-out circumference in inches
  • Divide the number of inches you measured by 12
  • Take that number, round up to the nearest whole number

 
Please be sure to give yourself a couple inches longer than your cut-out circumference as these gaskets are not shipped pre-cut to your size deck hatch!
 
For installation directions, please refer to Man Ship’s guide which can be found here.

Additional information

U/M

Each